Home/Home & Lifestyle/Furniture/INTEX Inflatable Lounger Air Sofa,Made By PVC And Flocking Materials With Foot Pad

INTEX Inflatable Lounger Air Sofa,Made By PVC And Flocking Materials With Foot Pad

RM68.80

Vendor: C3 Demo Ask a question

Return Policy: 10 days

In stock

Minimum quantity for "INTEX Inflatable Lounger Air Sofa,Made By PVC And Flocking Materials With Foot Pad" is 1.

Quantity:

+ −

Description

Product details of INTEX Inflatable Lounger Air Sofa,Made By PVC And Flocking Materials With Foot Pad

Product Specifications:

Sofa: 99 × 130 × 76CM
Left and right footrest: 64 × 28CM
Packing size: 30.5 * 11.1 * 35.6CM (length * width * height)
Product weight: 3.4KG factory configuration
Product load-bearing: within 100KG
Product material: 0.52mm (20.8ga) waterproof flocking surface and edges, 0.38mm (15ga) bottom
Precautions
1.Replenish the gas once every 3-5 days, it is recommended not to fill it too full when you start using it, and do not fill the product tightly (generally 7-8 minutes full)
Inflatable product repair:
To find the leak point:
fill it up, touch your hand close to the surface, or touch the sensitive skin of your body, close to the surface, feel it, there is a leak point where the wind comes out, find it little by little, be patient, Will find it!
Needle eye patching method:
First let the air out, leave a little inside, put two or three drops of glue on the mouth, block the hole, wait for the glue to dry out, press it slowly, then press it firmly for 2-3 minutes Open, you can inflate after 2-3 hours
The repair method of the mouth is bigger:
first let the product air out, if the crack is suede, we need to wet the suede first, use a blunt thing to remove the suede around the mouth, or smear The glue is around the mouth, and it will fall off as soon as you scratch the fleece with a toothpick, and then smooth the crack. Put the mouth on the mouth with glue, wait for the glue to dry quickly, press it slowly, and press it again Repair the glue again, and then cut a patch larger than the mouth, then use the patch to make up a layer, press for a few minutes, wait for the glue to dry and press it with a heavy object for a few hours before inflating.